Exposing a server to the internet might be pretty scary.
You would like to limit the number of exposed services to a minimum.
Probably the most powerful service on any Linux machine would be the ssh server.
With it you can control the computer and let it perform literally any task.
If you want to be able to control your Raspberry Pi, or just about any other Linux based computer, from any place on the internet you may want to guard yourself against unauthorized access.
The ssh service is pretty secure by itself. However there are a couple of things you can do to make it even more secure. Some, but most likely not all of them, are:
There are probably many more ways to secure your ssh server against attacks. You can even make a combination of most of the above safety precautions. On this page however I'm going to limit myself to the last point, Two-factor authentication. Just because it's a reasonably recent and a relatively easy way to install adequate protection, provided by none other than Google.
Setting up Two-Factor Authentication is relatively simple.
But before you set it up, make sure you've got a contingency plan, in case you lock yourself out when something goes wrong.
The best way is to be able to login to the machine locally.
Local accounts are not affected by the Two-factor authentication.
If you can't login locally, be sure to keep the current ssh session alive until you have tried to login on a second connection to the modified setup.
You may do all this while logged in to a terminal session, either locally or remotely over ssh.
First of all install the Two-factor Authentication package:
sudo apt-get install libpam-google-authenticator
Then start the Google authenticator program on your Raspberry Pi (or just about any other Linux machine).
The output of this program looks something like this:
Obviously you may have to increase the size of your terminal screen to display the QR code completely. Now you should press Y for Yes and the codes are stored.
The next 3 self explaining questions asked by the program can all be answered with Yes, this will give you the best security.
Please note that the above screen shot shows you 5 emergency scratch codes.
With these codes yo can still login when you have no access to your phone.
Each of these codes can only be used once.
These codes are stored in the file .google_authenticator in your home directory.
Each time a code is used, it is removed from this file until all codes are used up.
The debian repository may hold an older version of the Google authenticator, with which you can not generate new codes. You may simply run google-authenticator again, which will generate new codes for you. This will also generate a new secret key though. So you'll have to delete the old key from your Google Authenticator App on your phone and re-enter the new key again.
The next step is to install the Google Authenticator App on your mobile device. Simply go to the Google Play store and search for Google Authenticator. There's also an iOS app and even a Blackberry app, if they still exist by the time you read this.
Fire-up the Google Authenticator App once it is installed and add an account.
The easiest way is to scan the QR code (an option for that is provided when you want to setup a new account).
In case you don't have a bar code scanning App on your device you are prompted to install one.
Simply accept the one which is proposed to you.
You can also setup an account by typing in everything manually. All you need is a name for the account (any name will do) and the secret key, provided by the Google Authenticator program on your Raspberry Pi. Select Time based, then press ADD.
You can have multiple accounts on your Google Authenticator App. And while you're at it I advise you to set up Two-FactorStep Authentication for your Google account too. It works the same for both.
The App will show you the code you need to enter as the second authentication step on your Raspberry Pi.
The little pie shaped clock to the right of the code indicates the time during which that code is valid.
Once the time runs out, the code is discarded and replaced by a new one.
Therefore it is absolutely vital that you setup the time on your Raspberry Pi and your mobile device properly. This basically means that you'll have to use network time synchronization, which is the default on your Pi and on most phones.
Before Google Authenticator does anything at all you'll have to change some more settings.
Add a line at the end of the file /etc/pam.d/sshd with the text auth required pam_google_authenticator.so.
In the file /etc/ssh/sshd_config locate the line containing ChallengeResponseAuthentication. This option is set to no by default, change it to yes.
Finally restart the ssh server by typing:
sudo /etc/init.d/sshd restart
Don't disconnect from your terminal yet! Check, with a second terminal, whether the new setup actually works. If it doesn't you'll still have the chance to fix it with your already existing terminal.
If you do lock yourself out you can always still login directly using the console. However that will be rather difficult on a remote machine.
Security often comes with some inconveniences.
It's not different this time.
Normally Nautilus, Nemo and Gigolo (and probably a dozen other file browsing utilities) running on another Linux machine can no longer use ssh to mount your Raspberry Pi file system anymore.
This is because these programs are usually not aware of the extra password which is required.
You can still mount your Rpi's file system on another Linux machine using sshfs though.
Fortunately passwordless connections using pre-shared keys is still possible.